What are the common lighting methods of museum showcases?
Author:DG Master-museum showcases manufacturers
Museum showcases have a very important role in our lives, so do you understand what are the common lighting methods of museum showcases? The following is a detailed introduction to everyone: 1. The top face light -up. This is the most common lighting method in the early days.
That is, the showcase is shining on the top. All exhibits are at a glance, suitable for small showcases and inspection exhibits details. In the early days, it was arranged with a tube, and the glass was used below to beat the light tube white color.
The fingers were not too high. Later, changed to LED panel lamp or lamp belt. No matter what kind, the distance between the light source and the glass should be controlled, the surface treatment of the froster glass, and the light will be very uniform.
If you can't do it well, it is one by one. Of course, this kind of unhappy place is: ● Top light will generate glare. The solution is the brightness of the coloring light source, and it is softened.
Another way is to make the glass inside, or the gear board outside the showcase is higher, which will be much better. Another way is to tilt the glass surface into tilt, so that the mixed gitamins will be consistent with the eyes of the audience, and it will not enter the audience’s sight. ● The lights are too flat to focus on highlighting exhibits.
Of course, there are also solutions, which can make the interior of the showcase dark. In this way, the exhibits are expressed in the lights. Especially exhibits with high reflectivity, such as ceramics, etc.
2. Top key lighting. This is also a commonly used method, that is, placing halogen lights at the top, a glass in the middle, and through the glass to light up the exhibits.
Glass separates exhibits from lighting to achieve light and heat separation. Different from the first way, this method can achieve key lighting for exhibits. To emphasize the detail, you can also use wide light beam lamps to supplement.
Of course, its disadvantages are also obvious: there is a group of light spots on the glass. Especially the time is long, the glass is ash on the glass, and the light spots are more obvious. In the era of LED, people changed the lamps to small tile digital lamps, and the heat dissipation was much lower! It also changed the glass to a black grille, so it looks much better! However, you must pay attention to the heat of the lamp.
, Excessive of the heat dissipation of the showcase itself, it will cause the accumulation of heat, causing cultural relics damage. No matter what method is changed, it is best to have a layer of partition between the lamps and the exhibits, especially the traditional lamps. There is a partition that can achieve light and heat separation.
On the other hand, if the lamp aging is aging and falls, it can effectively protect the exhibits. Especially the lamps located in the center of the showcase, in case of falling, will cause inestimable losses! 3. In the era of traditional lighting, optical fiber lighting has a large calories, and for precious cultural relics, especially for thermal sensitive exhibits, the lamp itself must be solved itself itself The fever, as well as infrared radiation in light, is more troublesome.
In this case, optical fiber lighting is born in response. The principle is to configure the optical generator at the remote end of the showcase, and then guide the light to the need for the need. This method fully realizes light and heat separation.
Since the light of the light source enters the fiber, it is generally filtered, so the harmful light can be filtered out. Although the light and thermal separation is perfectly solved, there are the following disadvantages: ● High cost, it includes light sources, reflector, color filter, and optical fiber, which is the most cost -effective lighting equipment among all lighting lamps; The fiber is also relatively thick and it is not easy to hide; ● Light flux is small, and it is not suitable for large -scale lighting; ● It is difficult to control the beam angle, especially the small light beam angle. There are many shortcomings, and the advantages are very obvious.
In the early days of traditional lamps, fiber was used more for museum display lighting. But with the popularity of LED lighting, there are fewer and fewer fiber optic fibers. If we have a chance, we will continue to discuss the content of this piece in the future.
We must continue to pay attention to it!.
Recommend：jewelry showcase manufacturers
Time: September 25, 2020
Location: Morocco
Area (M²): 200 sqm
The brand has always been family owned and managed, adhering to the essence of the family tradition and exquisite craftsmanship, and is a leader in the high-end jewelry industry. Elegance creates tenacity, and light interprets youth. No matter what state, there is no boundary between softness and strength, only the most loving heart can dance a rhythmically bright moment. This is jewelry. Turn precious jewelry into dazzling masterpieces, just to create a world of unparalleled beauty. Elegance creates tenacity, light interprets youth, no matter what state, there is no boundary between softness and strength.
Time: 2022.3.1
Location: India
Area (M²): 147m²
By clever layout, showed high-end brand jewelry vision,to display jewelry in bronze color and bright light, interior transparent store.
With curved design, warm color and careful material selection, the brand not only insist the brand heritage and exquisite skills, but also creates a new aesthetic shopping space with unique creative style and keen vision ahead of The Times.
Except for the details of arc elements, the overall style of the store is more young and modern. The shop window adopts a more transparent and bright design, the interior color is lighter, and the jewelry display cabinet adopts light-colored materials and the style of furniture is more youthful.
This store is the first of the new brand in new high-end image store for the customer to expand the company's sub-brand. Due to the bustling commercial shopping streets, it takes advantage of the favorable geographical location to attract more consumers and enhance the brand awareness.
After the factory finished production, we assisted customers to provide international transportation services. When the whole batch of goods arrived at the customer's shop site, we provided professional installation drawings and videos, and guided customers to on-site installation through telephone and video face-to-face. With the cooperation of both parties, we completed the installation of the whole store within a week.
Time: January 25, 2022
Location: Myanmar
Area (M²): 300 sqm
This brand is a very influential and well-known local brand, focusing on high-end luxury products. What it wants to bring to consumers is not only noble and elegant honors, but also hopes to inspire people to discover and experience every difference in life with breakthrough concepts. Lead the present with the light of dreams and discover the future with innovative thinking. The main design concept is to follow the concept of the product itself, break through the tradition, and be simple yet noble. Pursue a simple and elegant design that avoids redundancy. The avant-garde and high-grade brushed brass runs through the entire space to highlight its distinctive personality, and the display is rich in shape and atmosphere, simple yet delicate. Turn precious jewelry into dazzling masterpieces, just to create a world of unparalleled beauty.
Time: December 17, 2021
Location: India
Area (M²): 147 sqm
The store is a large street store area, designers according to the latest fashion to create a high-end luxury store.
The customer opened the first store of this brand, and the jewelry positioning and style is high-end young fashion; Designers integrated the most popular design style and showcase style, with high-end luxury leather as the main element, more highlights the high-end and luxury of the whole store.
Time: October 6, 2021
Location: Malaysia
Area (M²): 110 sqm
Retaining the elements of CHOW TAI FOOK brand culture, through the fashion, the trend of high-end market of showcase, make out the new design, make them both have brand core elements, but also have high-end and luxury design, make the whole store image more unique, and more attractive;
Traditional cabinet design and display limited space no longer meet consumers' demand for jewelry. Therefore, the customer hopes to improve the image of the whole store, add more high-end and luxurious elements, and enhance the space collocation design of the whole cabinet to increase the sales of the store.
+86 13610079233
+86 13610079233
Quick links
Jewelry
Museum
China Marketing Center:
14th Floor, Zhihui International Building, Taiping Town, Guangzhou(Full Floor)
China Manufacturing Center:
Dinggui Industrial Park, Conghua Taiping Town, Baiyun District, Guangzhou.