Museum showcase functional cultural relics protection technical requirements
Author:DG Master-Showcases manufacturer
Museum showcase Function: The showcase is the museum's space to show cultural relic art with a real attitude and artistic effect. It is a direct place for museums and audiences to communicate silently. The materials used in the showcase must be stable and safe for the cultural relics due to direct or indirect contact with the exhibition cabinet and cultural relics.
They release harmful gases by exposing cultural relics or through their own aging, including sulfur dioxide, hydrogen sulfide, nitric oxide, nitric oxide, ozone and volatile organic acids, volatile aldehyde, formaldehyde and acetaldehyde, etc. Cultural relics cause damage. The display cabinet material should be used for the manufacture of cultural relics showcases after testing or chemical analysis.
Generally speaking, materials that cause potential harm to cultural relics include wood, paint, adhesive, leather, woolen, chemical fiber textiles, and certain textile dyes. In other words, stainless steel, aluminum alloy and surface -spraying coating steel plates are safer than other materials. In order to ensure the safety of cultural relics, the inner lining plate, pad material and decorative materials of the showcase should be tested or chemically analyzed that the exact conclusion will not cause damage to the cultural relics.
The display cabinet should be able to control the temperature and humidity showcases should be well sealing, and the internal equipment should be installed with a device with a temperature and humidity instrument and controlling humidity. The first choice for the exhibition cabinet to control humidity is to install the dehumidifier. When the humidity exceeds the requirements range, the humidity controller can automatically open the humidifier to reduce the humidity and display the alarm signal at the same time.
The second option of the exhibition cabinet control humidity is to place hygroscopic buffer materials. This choice requires that there is enough space in the box in the lower layer of the showcase to place hygroscopic buffer materials such as silicone. Wet -absorbing buffer materials can absorb moisture under the humid climate in the summer.
Under the dry climate in winter, water can be released to keep moisture in the showcase stable. Staff needs to replace hygroscopic buffer materials according to the characteristics of climate. In other words, the staff needs to put the moisture -absorbing buffer material after drying it so that it has the ability to absorb it in the showcase before they can play a role.
In winter, the staff needs to put the moisture -absorbing buffer material in a small environment with a large humidity to absorb enough water to make it have the ability to release the water and put it in the showcase. Experience of the Canadian Museum. According to the experience of the Canadian Museum, about 20 kilograms of silicone should.
Putting 2.5 kg of silicone in the exhibition cabinet space per cubic meter of the showcase can also meet the requirements. .
Recommend：Jewelry showcase manufacturers
Watch display showcase manufacturer
Time: April 11, 2021
Location: Saudi Arabia
Area (M²): 100sqm
This brand project is mainly based on the main colors of youth and fashion. Silver mirror stainless steel and white high-gloss piano painting are used as accents, which add a high-end avant-garde atmosphere to the space and enrich the entire space. The entire store space is divided according to product categories, and the display is rich; and in order to increase the time customers stay in the store, in the design of the flow of people, we have designed a loop-type moving line composition to prevent consumers from taking repeated paths and affecting shopping. The experience also allows consumers to appreciate the products in the store at one time. The whole space planning is sparse, not crowded, so it looks simple and generous, and at the same time creates a comfortable shopping space and environment for customers. Promote customer shopping, and give customers a good mood, thereby increasing the store's transaction rate.
Time: November 23, 2021
Location: Shandong Linyi / Shandong Linyi
Area (M²): 139 M²
Retaining the elements of Lao Fengxiang brand culture, through the fashion, the trend of high-end market of showcase, make out the new design, make them both have brand core elements, but also have high-end and luxury design, make the whole store image more unique, and more attractive
Time: April 29, 2022
Location: USA
Area (M²): 120sqm
This project is a commercial center street shop in New York City of United States, shop area of about 120 square meters, positioning is the mid and high-end jewelry, consumers are mainly in the mid and high-end, it is a old shop for other items before, after signing contract, needs comprehensive design improvement, hope that through our new design makes customer a new and unique brand image.
Time: December 17, 2021
Location: India
Area (M²): 147 sqm
The store is a large street store area, designers according to the latest fashion to create a high-end luxury store.
The customer opened the first store of this brand, and the jewelry positioning and style is high-end young fashion; Designers integrated the most popular design style and showcase style, with high-end luxury leather as the main element, more highlights the high-end and luxury of the whole store.
+86 13610079233
+86 13610079233
Quick links
Jewelry
Museum
China Marketing Center:
14th Floor, Zhihui International Building, Taiping Town, Guangzhou(Full Floor)
China Manufacturing Center:
Dinggui Industrial Park, Conghua Taiping Town, Baiyun District, Guangzhou.