What are the techniques of the design of the museum showcase?
Author:DG Master-Showcases manufacturer
There are many skills about the design of the museum display cabinet size, and many people are not very clear, so let the editor introduce it to you in detail today! At the beginning of the design, the museum's data can be measured by 3D measuring instrument to measure the generally measured by the 3D measuring instrument. The data of the data, although the design data is not so high, the benefits are that the design efficiency is relatively high, and it can be quickly obtained. Then design the renderings.
2. For the data designed by the showcase, we must carry out artificial measurement and proofreading of the measuring instrument. Because the data at this time is more important, a little error may cause serious consequences that cannot be installed during installation.
3. When designing the size of the showcase, it is recommended to reserve a space of 0.5-1cm for fine-tuning in the future installation.
Generally, the design of the exhibition cabinet size follows the principle of "should be big or small". If you know that the gap can be filled by engineering adhesive, it does not affect the beauty, and it can also be auxiliary role for the fixation of the showcase. However, if the showcase is likely to cause the consequences of inaccessible installation, it is very difficult to adjust later.
4. For the design of sheet metals, our "should be big or not small" because sheet metal can be reduced and adjusted through bending, polishing, etc. during the welding process.
The ductility and plasticity of the metal provide room for improvement for the design of the showcase. 5. There is another trick to share with you.
If the exhibition cabinet is installed, the overall cannot be balanced. If the inclinedness is not very large, then you can not adjust the balancing through the angle of the roller. This method can make up for the unevenness of the sheet metal and the cabinet itself.
.
Recommend：Jewelry showcase manufacturers
Watch display showcase manufacturer
Bahrain
140 square meters
Bahrain jewelry brand project signed a cooperation agreement with DG Master of Display Showcase in 2019, this project was planned and provided services by DG professional and senior designer team. Such as the brand pictographic shop design layout, showcase production, post-installation and other one-stop output. Our project was awarded by our clients and their clients.
Time: October 6, 2021
Location: Malaysia
Area (M²): 110 sqm
Retaining the elements of CHOW TAI FOOK brand culture, through the fashion, the trend of high-end market of showcase, make out the new design, make them both have brand core elements, but also have high-end and luxury design, make the whole store image more unique, and more attractive;
Traditional cabinet design and display limited space no longer meet consumers' demand for jewelry. Therefore, the customer hopes to improve the image of the whole store, add more high-end and luxurious elements, and enhance the space collocation design of the whole cabinet to increase the sales of the store.
+86 13610079233
+86 13610079233
Quick links
Jewelry
Museum
China Marketing Center:
14th Floor, Zhihui International Building, Taiping Town, Guangzhou(Full Floor)
China Manufacturing Center:
Dinggui Industrial Park, Conghua Taiping Town, Baiyun District, Guangzhou.