What are the processes of customization of museum showcases
Author:DG Master-Showcases manufacturer
The museum showcase plays a very important role in the museum, so do you know what the process of customization of the museum showcase is? The following is a detailed introduction for everyone: 1. The raw material wood displayed by the museum: The advantage is that the structure can be adjusted. Moreover, the price of materials for display cabinets is also moderate.
Stainless steel materials, not rust, can reach high brightness after polishing. Iron film material: The advantage is that the material is low in price and light quality. The disadvantage is that the structural change is not great.
If the production materials of the entire display cabinet are acrylic, the advantage is that there is a transparent crystal effect and a certain degree of durability. Glass: The advantage is that the material is cheap. Second, the design method design of the showcase should attract the attention of consumers from the display cabinet design.
The design principles should be simple, generous, and beautiful. A good display cabinet is to combine all these factors to make it natural, unique and easier to feel. The role of the display cabinet with a clear theme is to set off the products of the show.
Therefore, the theme of the design of the display cabinet must be consistent with the temperament, characteristics and image of the display product. 1. The scale of survey (or providing drawings and specific requirements) is usually usually established after receiving the customer's measurement notice, a special measurement list should be established.
This list reflects the specific information of some shopping malls and Party A. Requires to simplify this process. Generally, contact A to contact the sales staff of the party first, and then go to the site to conduct on -site investigations with the shopping mall.
This will reduce many unnecessary mistakes. 2. In terms of drawing drawings, the drawings are generally designed according to Party A's requirements, and different renderings are designed according to the level of different shopping malls.
The display cabinet manufacturer will establish a special design process based on the size table. These files reflect this project. Provide information to promote better operations and implementation of the project.
This document uses the tracking method. When the designer receives the measurement unit of the project, the designer starts to establish a tracking method. From the project to confirm to the factory to connect to the museum showcase factory.
3. Dragon confirming that the link is the most important and most prone to problem -related links in the product display cabinet of specialty stores. Usually reflected in the changes of the site and the production requirements of shopping malls.
Usually, if the location changes, the shopping mall will notify Party A in advance. Timely notify the display cabinet manufacturer for re -measurement. In the production requirements of the shopping center, the shopping center usually put forward some stricter regulations, which usually conflicts with Party A's CI standard.
If production is not produced in accordance with the requirements of the shopping center, the museum showcase custom manufacturer's entry deposit cannot be refunded. It is hoped that Party A will also strengthen confirmation of this aspect while communicating with the mall to facilitate the on -site operation of the display cabinet manufacturer. 4.
Quotation confirmation drawings confirm that we will offer special projects based on the drawings. Party A will confirm and review it. After confirming the review, we will notify us to produce.
Party A shall send a written notice on the production of the shop cabinet of the shop commodity museum, and fax it to the manufacturer customized by the museum showcase. Museum showcase custom manufacturers will also be designed when receiving production notices. Send the process form and the final confirmation chart to the factory, and then the factory performs operations according to a specific documentation.
5. After receiving the design flowchart, the factory production plant has completed the material review and established the material application form for the project. The materials used in this project are made on it.
Workers collect materials from the warehouse according to the specific details of the materials application form. For production, the factory manager shall conduct on -site inspections and acceptance of the project while completing the factory production, and establish an on -site acceptance table for the project to ensure that the product pass rate reaches 100%. In this link, the factory must strictly follow the design.
The specific requirements in the flowchart should be operated to avoid some problems. 6. After installing the product display cabinet of the production store on the spot, we must also set the construction order of this project during the on -site assembly (using the tracking method to complete the product display cabinet of the specialty store).
These documents reflect some of the basic information of the project and record some problems that occur during the assembly process. On -site construction is usually caused by emergency situations and some non -artificial factors. Museum showcase custom manufacturers will reflect it in this document and provide them to Party A and shopping malls.
Confirm that after Party A can better review the acceptance and acceptance, the museum showcase manufacturer should pass the project construction order to Party A as soon as possible to inform the project that has passed. .
Recommend：Jewelry showcase manufacturers
Watch display showcase manufacturer
Time: April 11, 2021
Location: Saudi Arabia
Area (M²): 100sqm
This brand project is mainly based on the main colors of youth and fashion. Silver mirror stainless steel and white high-gloss piano painting are used as accents, which add a high-end avant-garde atmosphere to the space and enrich the entire space. The entire store space is divided according to product categories, and the display is rich; and in order to increase the time customers stay in the store, in the design of the flow of people, we have designed a loop-type moving line composition to prevent consumers from taking repeated paths and affecting shopping. The experience also allows consumers to appreciate the products in the store at one time. The whole space planning is sparse, not crowded, so it looks simple and generous, and at the same time creates a comfortable shopping space and environment for customers. Promote customer shopping, and give customers a good mood, thereby increasing the store's transaction rate.
Time: January 25, 2022
Location: Myanmar
Area (M²): 300 sqm
This brand is a very influential and well-known local brand, focusing on high-end luxury products. What it wants to bring to consumers is not only noble and elegant honors, but also hopes to inspire people to discover and experience every difference in life with breakthrough concepts. Lead the present with the light of dreams and discover the future with innovative thinking. The main design concept is to follow the concept of the product itself, break through the tradition, and be simple yet noble. Pursue a simple and elegant design that avoids redundancy. The avant-garde and high-grade brushed brass runs through the entire space to highlight its distinctive personality, and the display is rich in shape and atmosphere, simple yet delicate. Turn precious jewelry into dazzling masterpieces, just to create a world of unparalleled beauty.
Time: 2021.5
Location: Vietnam
Area (M²): 100 sqm
Color collocation: give priority to with white, milky white, and gold color with warm coffee that is auxiliary.
Modeling: One of the main modeling of the whole store is the combination of circular arc with golden SS and other design elements.
Material: main material is white leather, auxiliary material is warm brown leather, gold SS, opalescent marble and so on.
Currently, the shops are all traditional row counters. The counters are old and crowded, which makes the whole shop look traditional and without any uniqueness.
The whole installation effect restored the whole design concept maximum , making the whole store image look very high-end and luxury.
Through our big efforts, finally customer opened the shop as scheduled, the installation effect of the whole store received the client boss good reputation, all are very satisfied with our DG products.
+86 13610079233
+86 13610079233
Quick links
Jewelry
Museum
China Marketing Center:
14th Floor, Zhihui International Building, Taiping Town, Guangzhou(Full Floor)
China Manufacturing Center:
Dinggui Industrial Park, Conghua Taiping Town, Baiyun District, Guangzhou.