What are the issues to pay attention to when making museum showcases?
Author:DG Master-Showcases manufacturer
The existence of the museum display cabinet is to protect our cultural relics. Therefore, the museum showcases have very high requirements for it when designing. When making museum showcases, we need to pay special attention to some details.
Let's introduce it! 1. The material of the showcase must be stable and safe. Due to direct or indirect contact with the display cabinet and cultural relics, if the materials used in the showcase contain chlorine, sulfur or other acidic ingredients, it will inevitably cause damage to the cultural relics damage.
Jewelry showcases release harmful gases through contact with cultural relics or through their own aging, including sulfur dioxide, hydrogen sulfide, nitric oxide, nitric oxide, ozone and volatile organic acids (sores and eleneos) Acetaldehyde) Damage to cultural relics and other cultural relics. Generally speaking, materials that cause potential harm to cultural relics include wood, paint, adhesive, leather, woolen, chemical fiber textiles, and certain textile dyes. In other words, stainless steel, aluminum alloy and surface -spraying coating steel plates are safer than other materials.
In order to ensure the safety of the cultural relics, the lining plate, pad material and decorative materials of the showcase should be tested or chemically analyzed. The exact conclusion will not cause damage to the cultural relics. 2.
The temperature and humidity control showcase of the cultural relics showcase should be well sealing. The internal equipment should be installed with a equipment with a temperature and humidity instrument and controlling humidity. The equipment is not allowed to install the same body with the showcase.
The first choice for the exhibition cabinet to control humidity is to install the dehumidifier. When the humidity exceeds the range of required, the humidity controller can automatically turn on the humidifier to reduce the humidity and display the alarm signal at the same time. The second option of the exhibition cabinet control humidity is to place hygroscopic buffer materials.
This choice requires enough space to leave enough space in the box in the lower layer of the showcase to place moisture -absorbing buffer materials, such as silicone. The moisture -absorbing buffer material can absorb the moisture under the humid climate in the summer. In the winter dry climate, it can be released to keep the water in the exhibition cabinet stable.
Staff needs to replace hygroscopic buffer materials according to the characteristics of climate. The silicone box of the lower layer of the showcase should have enough air pores for air exchange with the exhibition part of the upper cultural relics. The purpose of reserving hygroscopic buffer materials in the lower layer of the showcase is to not affect the exhibits in the showcase when replacing the silicone, that is, no mobile exhibits need to be.
3. Cultural relic show cabinet lighting requirements: cultural relic display cabinet lighting, according to the source is divided into natural light and artificial light. The light of the museum display lighting and lighting design is mainly natural sunlight or light emitted by fluorescent lamps, tungsten wire lamps, etc.
The museum showcases should be used to use the light source generated by inert gas. The light radiation can be divided into many areas according to the wavelength nature, including the wavelength of the visible light zone (400-750nm), the infrared light zone (›750 nm), the ultraviolet light zone (‹ ‹ 400 nm). The museum's display of lighting lighting mainly includes three ways: natural light, artificial light and comprehensive light.
The use of artificial light in display is generally considered to be completely controllable. Generally speaking, general light sources suitable for museums include fluorescent lamps, incandescent lamps, metal halide lamps, etc. But choose the light source carefully, because many light sources are more or less red -light outer and purple light outer rays with different strengths.
Therefore, in the display, the light source and lighting equipment can. In recent years, the cold light source of lighting by optical fiber -optical fiber fiber lighting has begun to be widely used in display. Because of its unique lighting method and the advantages of ordinary lighting, due to its unique lighting method and the advantages of ordinary lighting, it is very suitable for display and display of exhibition cabinet display for full -closed artificial lighting.
The biggest feature of boutique showcases is that there is no infrared light and ultraviolet light radiation, non -conductive and non -heating, can guide light to different places, will not produce aging, long service life, convenient lighting system maintenance, etc.
Recommend：Jewelry showcase manufacturers
Watch display showcase manufacturer
Time: August 8, 2020
Location: Switzerland
Area (M²): 110 sqm
This project is a high-end light luxury jewelry brand store. In terms of space design, customers want a very personalized space that focuses on experience. In the design of boutique display cabinets, it breaks the conventional appearance design of jewelry display cabinets. Minimalist elements are used in the modeling design to make the design more distinctive. At the same time, the stainless steel seamless welding process is adopted, which makes the color and luster of the whole store evenly matched and the texture is excellent. The matching display complements each other.
+86 13610079233
+86 13610079233
Quick links
Jewelry
Museum
China Marketing Center:
14th Floor, Zhihui International Building, Taiping Town, Guangzhou(Full Floor)
China Manufacturing Center:
Dinggui Industrial Park, Conghua Taiping Town, Baiyun District, Guangzhou.