4 misunderstandings that are easy to exist in jewelry showcase customization

Because many customers do not know much about jewelry showcases, when customizing jewelry showcases, most of them put forward some crafts and ideas for jewelry showcase customization according to their own ideas, and this is also the most likely to cause misunderstandings. The following is DG display showcase on the list of the four most likely misunderstandings:

1. 1.The thicker the glass, the better. The strength of glass is not determined by thickness, but by whether it is tempered. After tempering, the strength of glass will increase by 3 to 5 times, and there is no large piece of broken glass that is easy to hurt people when broken. Like the glass door of a jewelry showcase, you cannot choose very thick glass, because if it is opened and closed frequently, the glass is too heavy and the hardware fixing the glass may fall off and break, resulting in glass damage. Therefore, when customizing jewelry showcases, try to ask the showcase factory to temper the glass to ensure safe use.

2. 
   

2．The choice of lamps and lanterns is the same as expensive and cheap. The choice of lamps directly affects the effect of product display and the service life of the showcase, and the color rendering index, heat dissipation and light decay of different brands of lamps will be different. At this time, we must choose jewelry-specific lamps of well-known brands . Brands such as imported epistar chips, OSRAM chips, and domestic Fideli are all good choices. When choosing, they will recommend the corresponding lighting effects according to the display layout of your products to ensure the best display effect of the products.

3．The thicker the customized plate of the jewelry display showcase, the better. When jewelry display showcase custom manufacturers make jewelry display showcases, some parts such as countertops and door panels need to use 15 or 18 mm boards, and other parts of the basic boards are 9 to 12 mm. This is because the thicker the board, the heavier the weight. Not only is it unsafe during installation and transportation, and the transportation cost is high, but also after installation, during long-term to use some parts easy to crack and fall, such as lintels, tops, etc., are heavy because of the weight

4．The thicker the paint, the better. The production process of paint is primer plus top coat, in the production of primer before the nail eye repair, after the patch with sandpaper to flatten, followed by a layer of showcase surface scraping pig's blood gray, dry after sandpaper grinding evenly and then primer coating. After the primer dries, then paint the top coat. Measure the paint effect is the paint brightness and surface flatness, not paint thickness.

• Year Established
  --
• Business Type
  --
• Country / Region
  --
• Main Industry
  --
• Main Products
  --
• Enterprise Legal Person
  --
• Total Employees
  --
• Annual Output Value
  --
• Export Market
  --
• Cooperated Customers
  --