The needs of the glass display cabinet for glass are necessary. The above part is ultra -white steel glass, and the cabinet may also use paint glass. The fixed paste of the glass is mainly dependent on glass glue, and the main component of the glass glue is sodium silicate (NA2O·MSIO2) composition of with acetic acid and organic silicone.
Sodium Silicate is easy to dissolve in water and is sticky. The south is also called water glass. Jewelry showcase factories generally use glass glue division neutral glass glue and shadow glue.
For factories, the factory mainly depends on the level of cost and the operation level of the glue process. Most professional jewelry showcases in jewelry display cabinets will choose conventional glass glue. The main advantages are fast curing, convenient operation, and low cost; the disadvantage is that residual and obvious glue marks will be left.
The biggest advantage of the shadowless glue is that it will not leave the rubber marks (can be seen from the name), and it is very firm after the glass paste; the disadvantage is that high cost, troublesome operation, and the trouble after the glass is damaged. The shadowless glue will use ultraviolet detection lights to speed up the coagulation time of glue when pasted glass. Jewelry showcase Jewelry display cabinets will inevitably be damaged during transportation and use.
It is necessary for jewelry dealers to replace glass, but we often encounter many customers responding that the glass is difficult to remove, especially the counter only one of the glass at the counter. It is difficult to remove it, it is obvious that the glass is glued with shadow without shadow. There are two main methods for how to take it down: Lao Fengxiang Jewelry Showcase First, heating method, use a hair dryer hot air to keep blowing on the glass surface.
Be careful to slowly and moderately heat the connection. The temperature is too high and cracks. It should be stepped step by step.
Gradually heated. During the heating, you can use a blade to cut glue to connect. The second, use related solvents, such as UV glue and glue agent dripping at the rubber layer, and then remove the glue for about 5 minutes.
If there is no way to remove the gold display cabinet, it can only be replaced by all the glass of the jewelry display cabinet. If it is conventional glass, it is very easy to handle. You only need to cut the glue slowly in that blade.
You only need to put some patience and time to solve it well. (The above is the product knowledge of the Shenzhen Showcase Factory. It comes from http://www.