The museum showcases need to be painted before the factory, so do you understand the importance of the museum's display cabinet paint process? The following is a detailed introduction: 1. Be careful when the painting cabinet paint is tuned. Generally, try the samples.
The number of coatings should be obtained at the preliminary obtaining color, and then the big sample is prepared according to the small sample results. First adjust the secondary colors and secondary colors in the small container. 2.
First add the main color (the color with large dosage and small color power in the color scheme), and then slowly add the dyeing power (or color scheme), constantly stir, and observe the changes in the color at any time. 3. "from shallow to deep", especially when adding strong pigments, avoid excessive amount.
4. When coloring, there will be slight differences in the color of the jewelry showcase paint and drying film. Various paint colors are generally lighter when the wet film.
After drying, the color is deepened. Therefore, if the sample is a dry model, the coloring paint needs to be tested after drying; if the sample is a wet model, you can drop the sample in the color paint to observe whether the two colors are the same. 5.
In advance, you should understand the floating level of the primary color and the change of paint, especially the amino coatings and over -chlorine coatings, you need to pay more attention to. 6. When preparing complex coatings, select the coatings with the same properties of the same nature.
The solvent system should also be dissolved in each other. Otherwise, due to the poor mixed solution of the coating, it will affect the quality. 7.
Because the color often has a variety of different colors, if it is equipped with a positive green, it is generally used to use the yellow and blue head with a green head. When you are orange, you should use red and yellow with yellow head. 8.
Using the slightly transparent characteristics of the color paint film, the appropriate background color can make the color of the surface paint more vivid than the color of the original paint. Color color, coating engineering is called "transparent color". For example, yellow primer can make the red more bright, gray paint make red more red, positive blue primer can make the black black and brighter, and the water blue primer makes the white more clean and innocent.
jewelry showcase manufacturers
museum showcases manufacturers