1. Main construction process (1) Larger construction process: Clean up the wood structure surface of the jewelry showcase→Snamed paper light→Shangrun Poor→Grinding bean→The first time the putty is scraped, the sandpaper is polished→Full scrape the putty for the second time, thin sand paper polished→Paint→Spray the first paint→Find color replenishment putty, fine sand paper polishing→Spray the paint for the second time, thin sand paper polish→Spray the paint for the third time, cool and dry houses and dry, polish→Water sandpaper polish, wax, and polish. Jewelry showcase (2) Mixed -color paint construction process: First clean the dust and wooden burr on the surface of the jewelry showcase, repair the grassroots→Flat the wood surface with scrubbed→Lacquer slices of scars→Broken bonitr→Coated oil→The first time is full of stabbed putty→Grind→Paint the bottom coating→The bottom coatings are dry and hard→Coating surface layer→Repair of replenishment putty→Wipe the third, paint through the paint for the second time, paint→Grind→Third daily face paint→Polish.
2. The construction specifications of the construction point of the construction point of the oil spray coating are an important process for spraying the varnish. First, the dust, oil pollution, and wood chips on the surface of the counter on the surface of the counter should be cleaned up.
Shangrun oil powder is also an important process for the paint brush. Use cotton silk dipped oil to apply oil to the surface of the counter on the surface of the counter during construction. When spraying the oil, the fuel injection gun should be easily and natural, and the fingers gently force the fingers.
When spraying, there are more dipping oil, dipping oil every time, and diligence when operating, and the requirements of the same direction, according to the order and left, left, right, and outside Sitting and smooth operation method construction construction. Jewelry display cabinet wooden jewelery display cabinet surface mixed oil construction standards at the grassroots level, in addition to cleaning the surface of the grassroots, should also be carried out for local putty. Before applying the surface layer, apply paint slices (insect glue) to the back cover with large color differences and wooden signs with large color differences and wooden fats.
It should be coated with dry oil or clearing at the grassroots level. Spray the dry oil layer evenly to spray it evenly. After the foundation oil is dry, the first paste is full of putty.
jewelry showcase manufacturers
museum showcases manufacturers