China's region is vast, and the north -south climate conditions are very different. Different geographical locations have an inestimable effect on the jewelry display cabinet; South Orange and North Crossing are typical cases, so how to deal with the jewelry display cabinet made in the south to adapt to the climate in the north in the northern climate Conditions, ensure the appearance effect? The following are some experiences that Xiaobian communicated with customers for a long time. The climate conditions of the jewelery display cabinet are hot and humid, and the air humidity is greatly so that the cabinet production is much water content.
The quality of the jewelry display cabinet produced locally is very good. However, the weather in the north is dry and cold, and the indoor winter is small and humid. If the jewelry display cabinet transports from the south, if the surface is paint or wood grain board, the plate is high.
In addition, the temperature is high during transportation, and the temperature in the north is low. After entering the room, the normal temperature is based on the principle of heat -up and cold. The jewelry showcases will crack until long under this condition.
So what should I do? Jewelry showcases use the most critical four -handed edge position in the north based on the factory experience in the south. The stainless steel must be sealed, and the surface should not be used as a wood grain board or paint. Decoration can make the wood parts not exposed, so as to avoid the occurrence of the above situation.
Of course, there are no requirements for the production of the counter in the north. The water content of the northern production board is similar to the local humidity. Therefore, the jewelry display cabinet will not fall off and crack due to shrinkage after painting.
The display cabinet must pay attention to the climate conditions of the land and some external factors. The details are processed in place to produce high -quality and high -life jewelry showcases. .