Sittle painting construction process of glass paint showcases

For the spray painting construction process of glass paint showcases, for the showcase, the production cabinet depends on the process. For the display cabinet manufacturer, the main lead of the showcase is particularly critical. Below I will introduce the explanation of the construction process of the display of the exhibition cabinet.

1. [Main Construction Process] (1) [Character Construction Process]: Clean the wooden structure surface of the counter display cabinet → scrubbing → upper moisturizing powder → polishing paper → full scrape the first passable, sandpaper polishing → full scraping The second pass, fine sand paper pollution → painting oil color → spray the first paint → find color replenishment putty, fine sand paper polish → spray the second paste, spray the paint for the third time, spray the paint for the third time, the paint, the paint for the third time, Cool dry house cools dry, polish → water sandpaper polish, wax, brighten. (2) [Mixed -color paint construction process]: First, clean the dust and wooden burr on the surface of the counter at the showcase at the counter, repair the grassroots level → flatten the wood surface with scrubbing → the scars at the knot → Full scraping putty in the first pass → polishing → painting bottom coatings → dry hard and hard bottom coatings → painting surface layer → replenishment putty for repair → polishing and rubbing the third paste painting for the second time the paint → wear light → polish → polish → Third daily face paint → polishing and waxing.

2. [Construction points] The construction specification of oil spraying is an important process for spraying the grass layer. The dust, oil pollution, and wood chips on the surface of the counter on the surface of the counter should be cleaned up.

Shangrun oil powder is also an important process for the paint brush. Use cotton silk dipped oil to apply oil to the surface of the counter on the surface of the counter during construction. When spraying the oil, the fuel injection gun should be easily and natural, and the fingers gently force the fingers.

When spraying, there are more dipping oil, dipping oil every time, and diligence when operating, and the requirements of the same direction, according to the order and left, left, right, and outside Sitting and smooth operation method construction construction. .

Custom Showcases

Showcases manufacturer

Display Showcase Manufacturer

Display Showcase suppliers 

Display Showcase

jewelry showcase manufacturers

custom jewelry showcases 

Watch Showcase    

watch display showcase   

museum showcases manufacturers  

custom museum display cases  

Museum showcase 

Luxury Showcase 

cosmetic display showcase

cosmetic showcase