Shopping counter design instructions

2022/08/09
Author:DG Master-museum showcases manufacturers

I. Counterfeeding Counter 1. The height of the container in the mall is generally 2400mm high (backplane 2400mm), and the width size is 300 ~ 500mm, such as jewelry showcases, cosmetics showcases, etc.

The effect of the container on the wall is generally 2600 and 2700 high; the plane layout design in the counter should consider not affecting the requirements of the use of fire facilities, air -conditioning facilities, various maintenance ports, doors and public channels. The high cabinet of jewelery display cabinets and cosmetics showcases, the back exhibition cabinet distance of the exhaust port, and the warm air mouth should not be less than 500mm. Jewelry showcase 2.

Counter interval height size: The 1,350mm height partitions between 1200mm along the Cabinet Linking channel edge, and then a 2400mm height partition to the wall; In the channel edge, the partition height of the column to the wall is 2400mm; if the partition of the two cosmetics showcases is the column and the column is not located on the channel edge, the partition height of the column to the wall is 2400mm, and the partition from the column to the channel to the channel Height is 1350mm. 3. If the counter is required, the bottom of the lintel is not less than 2400mm from the ground, and the height of the lintel is 300mm.

Special fossils are determined according to the brand's image requirements and on -site conditions. Jewelry display cabinet 2, Nakajima counter 1. The height of the interval between the counter, one -half of the deeper depth of the back cabinet in the extension cabinet line.

2. The height of the interval height between the clothing display cabinet and the reverse clothing display cabinet in the clothing area is 2400mm; in addition, the 600mm partitions of the 600mm high along the channel line between each counter are 1350mm. 3.

The height of the shelves is 1350mm (except for special shelves). 4. The height of the flat cabinet is 950mm --1000mm, and the width size is 600mm.

5. If the counter is required, the bottom of the lintel is 2400mm from the ground, and the height of the lintel is 300mm. It must be made with acrylic board hollow words.

Jewelry counters III, Special Counter 1. The cashier area counter is designed and produced by actual on -site conditions. 2.

The counters on both sides of the escalator must be used as a transparent semi -face cabinet with a height of 1350mm. Pay attention to avoid fireproof rolling curtain. 3.

If the pillar of the counter is on the channel line, the pillar Linzi must make an image as one side, with a height of 2400mm. .

Recommend:

Custom Showcases

Showcases manufacturer

Display Showcase Manufacturer

Display Showcase suppliers 

Display Showcase

jewelry showcase manufacturers

custom jewelry showcases 

Watch Showcase    

watch display showcase   

museum showcases manufacturers  

custom museum display cases  

Museum showcase 

Luxury Showcase 

cosmetic display showcase

cosmetic showcase

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Attachment:
    Send your inquiry

    Send your inquiry

    Attachment:
      Choose a different language
      English
      Nederlands
      ဗမာ
      Bahasa Melayu
      Latin
      Hrvatski
      Gaeilgenah
      Ελληνικά
      dansk
      italiano
      français
      Deutsch
      العربية
      norsk
      Polski
      Română
      svenska
      Pilipino
      Lëtzebuergesch
      Slovenčina
      Ōlelo Hawaiʻi
      čeština
      Azərbaycan
      Current language:English