Our factory finds that at some large -scale exhibitions or venues, some exhibitors often have some exhibitors to share less display space, plus shortage of lighting or lighting, adding great difficulty to the design of the showcase. This requires the designer of the showcase to try to change the unfavorable conditions and factors, otherwise it will lead to the failure of the entire display activity. How to use existing unfavorable conditions to achieve better display effects? First of all, the showcase designer must have space design, organizational and driving skills like architects, so that the small showcase will turn "big".
The following methods can be adopted: 1. Use small scale in the design of the booth shape. In a smaller display space, you must not make the booth shape and display props too large, but should be coordinated with the scale of the display space.
In terms of scale selection, the above body scale should be based on the basis, so that the audience should feel cordial and comfortable. 2. The exhibition hall environment can be combined with overall photos and local photos.
If the exhibition hall is relatively short, you can install a group of grille lights on the ceiling, row into line or square grid. Or use slot lighting to illuminate the top shed. You can also use a direct tube fluorescent light to make a large area of glowing ceiling.
You can also use the advanced "field lighting" lighting technology to make the ceiling, walls and grounds of the entire venue light up. In addition, at the back and bottom of the wall showcase, the lower part of the showcase is also installed with a straight -tube fluorescent lamp or neon light. In this way, the showcase will make people feel wide and tall, change the original depression and dullness.
3. The space interface and display channel should be selected for white or light colors. White and light colors are used on the surface of the wall shed or props and the appearance of the partition, which will increase the wide feeling of the space.
With deep color, it will make people feel a small space and a sullen mood. 4. In order to make the booth "bright", the light box -type structure can be used.
Adopt the K8 system (octagonal booster) or three -way plug -in frame structure, inlaid white organic glass, and the internal installation of direct tube fluorescent lamps can make the booth -based body transparent. attention. 5.
Reduce the number of display props. The exhibition hall is small, the density of the exhibition display must be small and less, and the passage must be wide to ensure the personal safety of the audience and make the exhibition hall look wide. 6.
The display of exhibits should be simple and integrated. Regardless of the appearance of the booth, or the appearance of the props, the "whole" and "simplification" should be avoided as much as possible. It must avoid complicated and trivial shapes.
It must be clear, concise and generous. This is especially important. 7.
No or less decorative patterns. The exhibition hall is small, and it is not advisable to use many large -scale and strong color pattern patterns, because these pattern settings will make people feel that the exhibition hall is "changing" smaller, and it will be loud. You can use a little separate pattern (such as logo, title flower, tail flower, etc.
). If you have to use a large -scale pattern, you must choose a small floral pattern, and the color should be shallow. 8.
Adopt small and fine and high -key techniques. The display in the small space must be selected for the exhibits, and the most typical and representative ones; and these exhibits should also be treated differently, the primary and secondary is clear. There should be differences, not in the form of a thousand articles.
jewelry showcase manufacturers
museum showcases manufacturers