The factors that affect the amount of formaldehyde release of the display cabinet are intricate. Aside from the overall product, there are many factors that affect the release of formaldehyde release of artificial boards. Influence.
1. Decoration method on the surface of Suzhou showcases is obvious on the closed effect of formaldehyde. In specific implementation processes, you should pay attention to the selection of adhesives released by low formaldehyde, various decorative materials and coatings, and reasonable processes to ensure that new formaldehyde release will not cause new formaldehyde release after decoration.
2. The loading rate The so -called loading rate refers to the ratio of the surface area exposed in the air in the air and the room content accumulation. The greater the loading rate, the higher the formaldehyde concentration.
Therefore, when the function is basically satisfied, the number of furniture pieces in the indoor space should be reduced as much as possible, so as to reduce the formaldehyde distribution in the furniture. 3. The spread of the spread is worthy of the importance of the edge of the board showcase.
When designing furniture, on the premise of satisfying the strength and structure, you can use the thin plate as much as possible. 4. The use environment and the environment has a great impact on furniture formaldehyde exudation.
Temperature, humidity and ventilation will affect formaldehyde distribution. Under normal climatic conditions, the temperature increases by 8 ¡ã C, the formaldehyde concentration in the air will double; the humidity increases by 12%, and the amount of formaldehyde release will increase by about 15%. Therefore, under the premise of conditional conditions, the air conditioner and fresh air system device can be used to adjust the temperature and humidity and fresh air volume of the room, so that formaldehyde emitting moderate control.
5. Chen Fang Time and conditions Due to the formaldehyde distribution concentration of the exhibition cabinet is directly proportional to the period after production, the furniture should be released for a period of time before use, and at the high temperature and high humidity environment at the time of Chen Fang, to accelerate the distribution of formaldehyde to reduce future use Pollution.