1. The coating construction skills and process steps of the jewelry showcase jewelry display cabinet requires high gloss, good painting, fair price. Those who meet these conditions can be selected with phenolic varnish and alcohol paint as facial paint.
Each manufacturer is also different. Now a reference example, its coating process is as follows: 1. Put the old powder of water 2.
Sand grinding worm glue putty 3. Focus on the color difference of the interface of the bar and the plate, observe the observation, observe the observation, observe Overall of workpiece. Then adjust the required color in the worm adhesive and apply it in the part that needs to be combined.
After grinding, touch it with your hands, you should feel smooth. 4. Gently use old sandpaper sand milling coating film.
Then wipe the workpiece with a semi -wet cloth to remove all the dust. Jewelry counters 5. Painting varnish should be evenly brushed.
First, add old flour and calcium carbonate 1: 1 Add water to slurry, that is, rub the coating slurry. Use iron red, iron yellow, ink, red Dan and other pigments to be adjusted into the required color. After adjusting, use a piece of wooden board to try.
Eliminate excess water powder, paint with worm adhesive, and look at its color effect after drying. It should be slightly lighter corresponding to the model, because the color of the paint will be darker. In addition, the color can be adjusted with wine color.
7. The surface treatment of the raw material row 8. Embedded putty 9.
The sand mill jewelry display cabinet should be painted with a primer after coloring, the primer includes a closed paint and polishing paint. After each lacquer is painted, the sand is grinded flat and then painted and a lacquer. This kind of paint film formed by the paint film formed by the paint, the paint, and the paint formed by the paint technology in the coating process is used to ensure that the paint film is intact.